# Function Block Bypass

**URL:** <https://opendaq.discourse.group/t/function-block-bypass/45>\
**Category:** ✋ Feature Requests\
**Created:** [December 17, 2024, 9:47am UTC](https://opendaq.discourse.group/t/function-block-bypass/45 "2024-12-17T09:47:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dusan](https://yyz2.discourse-cdn.com/flex004/user_avatar/opendaq.discourse.group/dusan/32/17_2.png) [@Dusan](https://opendaq.discourse.group/u/Dusan)\
**Post date:** [December 17, 2024, 9:47am UTC](https://opendaq.discourse.group/t/function-block-bypass/45/1 "2024-12-17T09:47:52Z")

</div>

**Introduction**

A Function Block can be set to Active, Inactive and Bypass.

I as an openDAQ user want to bypass a function block with changing the complete wiring of the signal chain.

For this I would like to have beside the Active property another property where I can Bypass the block.

Better would be an enum / selection list where I can select a mode.

Function Blocks should have the mode; Active, Inactive and Bypass.

Active - Connection are used:

Inactive: The input port clean received packages and does not forward these.

Bypass: The package is direct forwarded from the input to the output without manipulating it.

**Who shall implement the Feature**

openDAQ  
 Contribution

**Status**  
 Feature Planned on Roadmap  
 Feature Request is discussed in Working Group  
 Feature declined.